C4-LLDPE-Blown Film(Innovene license)
LL0410AA & LL0410KJ are linear low density polyethylene copolymers containing butene-1 as a co-monomer.
Recommended melt temperature for extrusion is about 180°C – 225°C.
LL0410AA & LL0410KJ should be stored in the dry condition below the 50°C and avoided from the exposure of direct sunlight.
* LL0410AA & LL0410KJ are suitable for food contact.
LL0410AA & LL0410KJ are suitable for thin and stiff blown films because of their good draw down properties.:
LL0410AA also can be used for applications such as carrier bags and garment wraps.:
LL0410KJ contains slip and anti-blocking agents for better opening properties.:
| C4-LLDPE-Blown Film(Innovene license) | |||
| Typical properties | Test method (DIN) | Unit | Value |
| MFI@190°C, 2.16 kg | D1238 | gr/10min | 0.9 – 1.1 |
| Density | D2839 | gr/ml | 0.924-928 |
| Vicat Softening Point | D1525 | °C | 105 |
| Tensile Strength@Yield, MD/TD | D638 | Mpa | 12/13 |
| Elongation@Break, MD/TD | D638 | % | 650/800 |
| Tensile Strength@Break, MD/TD | D638 | Mpa | 42/33 |
| Impact Strength, Dart | D1709 | gr | 90 |
| Haze | D1003 | % | 13 |
| Gloss (45°) | D2457 | Rating | 48 |
| Values shown are averages & are not to be considered as product specifications | |||
| * 38 microns, 2:1 Blow ratio / MD=Machine Direction, TD=Transverse Direction | |||
LL 0410 AA
